Small Utility Pouch
The Small Utility Pouch is a 4"x 6" x 2" pouch that
secures with Velcro and a snap. The front of the lid has a strip
of loop Velcro for attaching ID Patches. A large brass grommet on
the bottom of the pouch provides for excellent drainage.
black (SKU: MSUP BK)
coyote (SKU: MSUP DT)
olive drab green (SKU: MSUP OD)
ACU (SKU: MSUP ACU)
MultiCam (SKU: MSUP MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com. |
|
| |
Medium Utility Pouch
The Medium Utility Pouch is a 6" x 8" x 2" pouch
that secures with Velcro and a snap. The front of the lid has a
strip of loop Velcro for attaching ID patches. A large brass grommet
on the bottom of the pouch allows for excellent drainage.
black (SKU: MMUP BK)
coyote (SKU: MMUP DT)
olive drab green (SKU: MMUP OD)
ACU (SKU: MMUP ACU)
MultiCam (SKU: MMUP MC)
Velcro is a registered trademark of
Velcro brand fasteners. For more information, please visit Velcro.com. |
|
| |
Modular Admin Pouch
The Modular Admin Pouch is a 7" x 5" Velcro panel pouch
for attaching ID patches. The front has a 5" x 4" hook-and-loop
pocket with a D-ring inside for dummy-cording small items. The
front also has a Leatherman/single-pistol pouch with an adjustable
lid to fit any 6V Surefire light. This pouch is great for the
front of your plate carrier or backpack. It mounts onto modular
gear with our reverse snap system.
black (SKU: MADMP BK)
coyote (SKU: MADMP DT)
olive drab green (SKU: MADMP OD)
ACU (SKU: MADMP ACU)
MultiCam (SKU: MADMP MC)
Velcro is a registered
trademark of Velcro brand fasteners. For more information, please
visit Velcro.com. |
|
| |
Stacker Small General Purpose Pouch
The Small General Purpose Pouch is a 6" x 6" x 3"
zippered pouch. The front of the pouch has three rows of PALS
webbing for mounting modular pouches. The inside of the pouch
has a D-ring for dummy cording and two pockets for organizing
items. A large brass grommet on the bottom of the pouch provides
for excellent drainage. This well-rounded "everything"
pouch is perfect for the side of your back pack or for a plate
carrier. It is constructed of double-layered 1000 Denier Cordura.
black (SKU: SSGP BK)
coyote SKU: SSGP DT)
olive drab green (SKU: SSGP OG)
ACU (SKU: SSGP ACU)
MultiCam (SKU: SSGP MC)
|
|
| |
Stacker Large General Purpose Pouch
The Large General Purpose Pouch is a 6" x 11" x 3"
zippered pouch. The front of the pouch has five rows of PALS webbing
for mounting modular pouches. The inside of the pouch has a D-ring
for dummy cording. A large brass grommet on the bottom of the pouch
allows for excellent drainage. This pouch is constructed of double-layered
1000 Denier Cordura.
black (SKU: SLGP BK)
coyote SKU: SLGP DT)
olive drab green (SKU: SLGP OG)
ACU (SKU: SLGP ACU)
MultiCam (SKU: SLGP MC)
|
|
| |
Modular Medical Pouch
The Modular Medical Pouch is a 6"x 8" x 4" zippered
pouch. The front has three rows of PALS webbing and a 5"
x 5" utility pocket with loop Velcro sewn onto the lid. The
inside of the pouch has two 5" x 5" pockets and a D-Ring
of dummy cording. Four rows of elastic provide help for organizing
bandages and other medical supplies. A large brass grommet is
on the bottom of the pouch for excellent drainage. This pouch
is constructed of double layered 1000 Denier Cordura.
black (SKU: SMDP BK)
coyote SKU: SMDP DT)
olive drab green (SKU: SMDP OG)
ACU (SKU: SMDP ACU)
MultiCam (SKU: SMDP MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com. |
|
| |
Stacker 2 Magazine Pouch
Stacker 2 magazine pouch holds two M16 magazines. This pouch is
constructed of double-layered 1000 Denier Cordura. The front and
sides are covered in PALS webbing for mounting optional modular
pouches. Our Modular pistol pouches: single, double, and triple
(sold separately), go great mounted on the Stacker Two. A large
brass grommet on the bottom of the pouch provides excellent drainage.
One of the great features on the Stacker Two is the adjustable
magazine lid. This enables the operator to adjust for magazines
that are equipped with mag pulls or Ranger Plates. On the adjustable
lid is a 1” inverted pull tab for easy access when wearing
gloves. The Stacker two secures with Velcro and a button snap
for great magazine retention. This pouch mounts on to Modular
gear with our reverse snap system.
black (SKU: MPS2 BK)
coyote SKU: MPS2 DT)
olive drab green (SKU: MPS2 OG)
ACU (SKU: MPS2 ACU)
MultiCam (SKU: MPS2 MC)
|
|
| |
Stacker Four Magazine Pouch
The Stacker Four Magazine Pouch holds four M16 magazines. Essentially,
two magazine pouches in one, the Stacker Four is a single pouch
that has a separator in the middle and two adjustable lids. This
pouch is constructed of double-layered 1000 Denier Cordura. The
front and sides of the Stacker Four are covered in PALS webbing
for mounting optional modular pouches. Our modular pistol pouches—single,
double, and triple (sold separately)—go great mounted on the
Stacker Four. A large brass grommet on the bottom of the pouch provides
excellent drainage. One of the great features of the Stacker Four
is the adjustable magazine lid, which enables the operator to adjust
for magazines that are equipped with mag pulls or Ranger Plates.
The adjustable lid has a 1" inverted pull tab for easy access
when wearing gloves. The Stacker Four secures with Velcro and a
button snap for great magazine retention. This pouch mounts onto
modular gear with our reverse snap system.
black (SKU: SLGP BK)
coyote SKU: SLGP DT)
olive drab green (SKU: SLGP OG)
ACU (SKU: SLGP ACU)
MultiCam (SKU: SLGP MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com. |
|
| |
Stacker Six Magazine Pouch
Stacker Six Magazine Pouch holds six M16 magazines. Essentially
three magazine pouches in one, the Stacker Six is a single pouch
with a separator between the grouped magazines and three adjustable
lids. This pouch is constructed of double-layered 1000 Denier Cordura.
The front and sides of the Stacker Six are covered in PALS webbing
for mounting optional modular pouches. Our modular pistol pouches—single,
double, and triple (sold separately)—go great mounted on the
Stacker Six. A large brass grommet on the bottom of the pouch provides
excellent drainage. One of the great features on the Stacker Six
is the adjustable magazine lid, which enables the operator to adjust
for magazines that are equipped with mag pulls or Ranger Plates.
The adjustable lid has a 1" inverted pull tab for easy access
when wearing gloves. The Stacker Six secures with Velcro and a button
snap for great magazine retention. This pouch mounts onto modular
gear with our reverse snap system.
black (SKU: MPS6 BK)
coyote SKU: MPS6 DT)
olive drab green (SKU: MPS6 OG)
ACU (SKU: MPS6 ACU)
MultiCam (SKU: MPS6 MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com. |
|
| |
Stacker Two 308 Pouch
The Stacker Two 308 Magazine Pouch holds two 308 magazines. The
front and sides of the Stacker Two 308 are covered in PALS webbing
for mounting optional modular pouches. Our modular pistol pouches—single,
double, and triple (sold separately)—go great mounted on the
Stacker Two 308. A large brass grommet on the bottom of the pouch
allows for excellent drainage. One of the great features on the
Stacker Two 308 is the adjustable magazine lid, which enables the
operator to adjust for magazines that are equipped with mag pulls.
The adjustable lid is a 1" inverted pull tab for easy access
when wearing gloves. The Stacker Two 308, constructed of double-layered
1000 Denier Cordura, secures with Velcro and a button snap for great
magazine retention.
black (SKU: MPS2308 BK)
coyote SKU: MPS2308 DT)
olive drab green (SKU: MPS2308 OG)
ACU (SKU: MPS2308 ACU)
MultiCam (SKU: MPS2308 MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com. |
|
| |
