PRODUCT CATEGORIES
Accessories
Assault Vests
Back Packs
Belts
Butt Packs
Chest Rigs
Gas Mask Carriers
Holsters
Hydration Systems
Modular Gear
Rifle Slings
Subloads
|
Back
Packs
| Enhanced Medical Pack
The new Enhanced Medical Pack is the second
backpack in our Stacker product line. The main compartment is
13” x 22” x 7” and holds approximately 2,650
cubic inches.. On the inside of the main compartment are four
5.5” x 4” x 2.5” small utility pouches, two
11” x 4” x 2.5” long utility pouches, a 12”
x 21” flat zippered pocket, two 1000ml IV pouches, and a
pouch that fits up to a 100 oz. hydration bladder. The outside
of the pack is covered with PALS webbing and has two 12”
x 8” x 3.5” zippered pouches. The top pouch has room
for an Airway or other medical equipment, and the bottom pouch
is great for organizing instruments. The front of the pack has
7 rows up and 8 rows across. The side of the pack has 9 rows up
and 3 rows across. There’s 12” x 2” strip of
loop fastener to attach ID patches. The top of the pack has a
heavy-duty carry handle that will not come off. The shoulder pads
are fully adjustable with an adjustable sternum strap for wearing
over second line gear.
black (SKU: EMDP BK)
coyote (SKU: EMDP HT)
olive drab green (SKU: EMDP OD)
Multicam (SKU: EMDP MC)
|
|
| |
| Scorpion Pack
The Scorpion Pack is the third backpack in our
Stacker product line. The main compartment is 12” x 19”
x 8”. On the inside of the main compartment are two10”
x 8” x 2.5” mesh-zippered general purpose pouches
and a pouch that fits up to a 100 oz. hydration bladder. The outside
of the pack is covered with PALS webbing. The front of the pack
has 8 rows up and 7 rows across. The side of the pack has 9 rows
up and 4 rows across and is reinforced with scuba webbing for
added rigidity when attaching modular pouches. There’s a
12” X 2” strip of loop fastener to attach ID patches.
The bottom of the pack also has PALS webbing, 3 rows up and 5
rows across. The top of the pack has a heavy-duty carry handle,
two slots for radio antennas, and a hole to route a hydration
drinking tube. The shoulder pads are fully adjustable with an
adjustable sternum strap for wearing over second line gear. The
pack holds approximately 1,850 cubic inches.
black (SKU: PSCP BK)
coyote (SKU: PSCP HT)
olive drab green (SKU: PSCP OD)
ACU (SKU: PSCP ACU)
MultiCam (SKU: PSCP MC) |
|
| |
Stacker Cobra Pack
The Stacker Cobra Pack is the first back pack in our Stacker line.
The main compartment is 12" x 18" x 6" with a slot
that can hold up to a 100 oz. hydration bladder; a Velcro tab
is provided to hang the bladder from so it will not sink to the
bottom of the pocket. The front of the pack has an 11" x
12" x 3.5" large, general purpose pouch that has five
rows of PALS webbing and a 10" x 2" hook-and- loop fastener
for attaching name tapes or Durkadurkastan patches. The inside
of the general purpose pouch has two 10" x 11" and two
5" x 5" pockets for organizing your kit. The front of
the pack also has a smaller 11" x 5" x 3.5" general
purpose pouch with two rows of PALS webbing on the front. The
inside of this pouch has two 5" x 3" pockets for organizing
smaller items. The side of the main compartment is covered in
PALS webbing, and has cinch straps to tie down the pack or hold
a rifle. The back and shoulder pads are padded with 1/2"
closed cell foam and Coolmax for maximum comfort. The top of the
pack has a heavy-duty doubled carry handle that will not come
off. The shoulder pads are fully adjustable, with an adjustable
sternum strap for wearing over second-line gear. Each compartment
has a large grommet in the bottom for drainage. 1900 total cubic
inches.
black (SKU: BSCP BK)
coyote (SKU: BSCP HT)
olive drab green (SKU: BSCP OD)
ACU (SKU: BSCP ACU)
MultiCam (SKU: BSCP MC)
|
|
| |
To
see additional product descriptions, click on the type of product
in which you're interested in the column on the far left-hand side
of this page.
|