PRODUCT CATEGORIES
Accessories
Assault Vests
Back Packs
Belts
Butt Packs
Chest Rigs
Gas Mask Carriers
Holsters
Hydration Systems
Modular Gear
Rifle Slings
Subloads
|
Assault
Vests
Stacker Assault Vest
The Stacker Vest comes with four Stacker 2–style magazine
pouches. Each magazine pouch holds up to two M16 magazines for a
total of 8 magazines. The magazine pouch lids are adjustable and
have reversed pull tabs. Above the magazine pouches are two small
utility pouches. These 5" x 3" x 1.5" pouches are
great for storing small items. The utility pouches also have loop
fasteners on the front of the lids for attaching ID patches. This
vest comes with our same vest features but the shoulder pads have
been upgraded. Our new shoulder pads have PALS webbing for attaching
small pouches or slings.
Black (SKU: SAV BK)
coyote (SKU: SAV DT)
olive drab green (SKU: SAV OD)
ACU (SKU: SAV ACU)
MC (SKU: SAV MC) |
  
|
| |
Enhanced Patrol Vest
Four main magazine pockets are each capable of holding three M16
magazines per pocket, two M14, G3, FN/FAL magazines, sixteen rounds
of 12-gauge on an optional pull-out tray, and one HC/CS or smoke
grenade. The vest has four pistol magazine pouches, each capable
of holding a single stack of 1911 mag up to the Socom mag and Surefire
lights, Leatherman/utility, or any small item. It iincludes two
6” x 6” side pouches on the LightFighter that are nonremovable.
black (SKU: EPV BK)
coyote (SKU: EPV DT)
olive drab green (SKU: EPV OD)
ACU (SKU: EPV ACU)
MC (SKU: EPV MC) |
|
| |
Enhanced Stacker Assault Vest
The Enhanced Stacker Assault Vest comes with four Stacker
2–style magazine pouches. Each magazine pouch holds up to
two M16 magazines for a total of 8 magazines. The magazine pouch
lids are adjustable and have reversed pull tabs. Above the magazine
pouches are two small utility pouches. These 5" x 3"
x 1.5" pouches are great for storing small items. The utility
pouches also have loop fasteners on the front of the lids for
attaching ID patches. There are two GP pouches with PALS webbing
sewn onto the outer points of the vest for extra storage. This
vest is enhanced with upgraded shoulder pads that have PALS webbing
for attaching small pouches or slings.
black (SKU: ESAV BK)
coyote (SKU: ESAV DT)
olive drab green (SKU: ESAV OD)
ACU (SKU: ESAV ACU)
MC (SKU: ESAV MC) |
|
| |
Medical Technician Vest
Something for the "Docs" out there. Built with the help
of our Navy Corpsmen friends, the Med-Tech Vest will speed up
your response time tremendously. With multiple pouches across
the front, all constructed with medical gear in mind, all of your
first-response items will be at your fingertips. Currently being
tested by Corpsmen in Iraq and by SWAT medics, the Med-Tech Vest
has received outstanding reviews from the users.
black (SKU: MTV BK)
coyote (SKU: MTV DT)
olive drab green (SKU: MTV OD)
ACU (SKU: MTV ACU)
MC (SKU: MTV MC) |
|
| |
Modular Vest
A standard MOLLE platform high-quality built vest. The vest has
two inside Velcro pouches for documents, and low-profile shoulder
straps lined with CoollMax padding. The back of the vest will open
up for a 50 oz. CamelBak bladder.
black (SKU: VM BK)
coyote (SKU: VM DT)
olive drab green (SKU: VM OD)
ACU (SKU: VM ACU)
MC (SKU: VM MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com.
|
|
| |
Patrol Vest
The Patrol Vest is constructed entirely of 1000 Denier Cordura nylon
for strength. It has been made to be fully adjustable to fit over
all ranges of mission equipment; it has 36" of overall around
adjustment and 12" of vertical adjustment, allowing this vest
to be comfortably worn over MOPP gear, cold weather gear, and body
armor.
The back of the vest has a large, heavy-duty drag handle, as
well as six belt loops along the bottom that allow the vest to
be used with any web or duty belt. Each of the pouches on the
front of the vest feature oxidized brass grommets for drainage
that will not corrode.
Each side of the vest has two magazine pouches that each hold
three M16 magazines or a military smoke grenade and are closed
with hook and loop and a Fastex buckle. The outsides of the main
magazine pouches have smaller pouches that can each be used for
a pistol mag or folding knife.
black (SKU: VP BK)
coyote (SKU: VP DT)
olive drab green (SKU: VP OD)
ACU (SKU: VP ACU)
MC (SKU: VP MC) |
|
| |
Saw Gunners Vest
The Saw Gunners Vest is constructed entirely of 1000 Denier Cordura
nylon for strength and ruggedness. The vest has 36" of overall
around adjustment and 12" of vertical adjustment, allowing
it to be comfortably worn over MOPP gear, cold weather gear, and
body armor.
The back of the vest has a large, heavy-duty drag handle attached
across the shoulders as well as six belt loops along the bottom
that allow it to be used with any web or duty belt. Each of the
pouches on the front of the vest feature oxidized brass grommets
for drainage that will not corrode.
Each side of the vest has 200 Round Saw Drum pouches. The outsides
of the main magazine pouches have smaller pouches that can each
be used for a pistol mag or folding knife.
black (SKU: SGV BK)
coyote (SKU: SGV DT)
olive drab green (SKU: SGV OD)
ACU (SKU: SGV ACU)
MC (SKU: SGV MC) |
|
| |
SMV Vest
This traditional mesh-jacket-style vest features six magazine pockets
with adjustable Velcro closure lids and elastic across the front
so magazines fit snugly. Each pocket can hold a single M16, M14,
G3, FAL, or AK magazine. Optional 12-gauge pull-out trays and multiple
SMG magazines will also fit in the magazine pockets. The SMV vest
also features two utility pockets and one small utility pocket with
snap closure. It has internal map pockets as well as an internal
Camelbak pocket. The back of the vest is covered with PALS webbing.
This vest has vertical adjustment and 36" of adjustment around
the body.
black (SKU: VSM BK)
coyote (SKU: VSM DT)
olive drab green (SKU: VSM OD)
ACU (SKU: VSM ACU)
MC (SKU: VSM MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com.
|
|
| |
Stacker Plate Carrier
The Stacker Plate Carrier is the only one of its kind. It holds
any sized hard armor (SAPI) plates, front and back, and has a layer
of padding between the plates’ external layer of Cordura for
added comfort. The front plate carrier has seven rows of PALS webbing
for mounting optional modular pouches from our new Stacker line
of tactical gear. The top of the front plate carrier also has a
strip of Velcro for attaching ID patches. The back plate carrier
has seven rows of PALS webbing for mounting modular pouches. Our
Modular Camelbak Cover mounts great onto the back plate carrier.
The back plate carrier also has a heavy-duty drag handle that is
sewn throughout the entire back side to ensure that it will never
come off. The heavy-duty drag handle also attaches with Velcro to
the back plate carrier to keep it from snagging on any foreign objects.
The top of the plate carrier has two adjustable padded shoulder
straps that can be quickly disconnected if necessary. The front
and back plate carriers attach on the sides with two adjustable
12” straps and 2” side-release buckles.
black (SKU: SPC BK)
coyote (SKU: SPC DT)
olive drab green (SKU: SPC OD)
ACU (SKU: SPC ACU)
MC (SKU: SPC MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com. |
|
| |
Stacker Plate Carrier with Cummerbund
System
The Stacker Plate Carrier with Cummerbund is the only one of its
kind. It consists of a plate carrier that holds any sized hard armor
plates, front and back, and that has a layer of padding between
the plates’ external layer of Cordura for added comfort, plus
a removable cummerbund system. The front plate carrier has seven
rows of PALS webbing for mounting optional modular pouches. The
top of the front plate carrier also has a strip of Velcro for attaching
ID patches. The back plate carrier has seven rows of PALS webbing
for mounting modular pouches. The back plate carrier also has a
heavy-duty drag handle that is sewn throughout the entire back side
to ensure that it will never come off. The heavy-duty drag handle
also attaches with Velcro to the back plate carrier to keep it from
snagging on any foreign objects. The top of the plate carrier has
two adjustable padded shoulder straps that can be quickly disconnected
if necessary. The front and back plate carriers attach on the sides
with two adjustable 12" straps and 2" side-release buckles.
The removable cummerbund system has a sleeve that attaches to the
lower back portion of the plate carrier and has three rows of PALS
webbing on the front. The two sections of the cummerbund have three
rows of PALS webbing on each side of the cummerbund for attaching
modular pouches. The two sections connect and adjust with two 20"
1” webbing straps for full adjustment over soft armor. The
cummerbund sections join together on a Velcro panel that attaches
to the middle of the front plate carrier, and hook-and-loop Velcro
sandwiches the sections together, eliminating sagging on the front
and sides of the plate carrier.
black (SKU: SPCR BK)
coyote (SKU: SPCR DT)
olive drab green (SKU: SPCR OD)
ACU (SKU: SPCR ACU)
MC (SKU: SPCR MC)
Velcro is a registered trademark of Velcro
brand fasteners. For more information, please visit Velcro.com.
|
|
| |
Stacker Rig #4
The Stacker Plate carrier is the only one of its kind. It holds
any sized hard armor (SAPI) plates, front and back, and has a
layer of padding between the plates’ external layer of Cordura
for added comfort. The front plate carrier has 7 rows of PALS
webbing for mounting optional modular pouches from our new Stacker
line of tactical gear. The top of the front plate carrier also
has a strip of Velcro for attaching ID patches. The back plate
carrier has 7 rows of PALS webbing for mounting modular pouches.
Our Modular Camelbak Cover mounts great onto the back plate carrier.
A heavy-duty drag handle is also on the back plate carrier that
is sewn throughout the entire back side to ensure that it will
never come off. The heavy-duty drag handle also attaches with
Velcro to the back plate carrier to keep it from snagging onto
any foreign objects. On the top of the plate carrier are two adjustable
padded shoulder straps that can be quickly disconnected if necessary.
The front and back plate carrier attach on the sides with two
adjustable 12” straps and 2” side release buckles.
black (SKU: VSR4 BK)
coyote (SKU: VSR4 DT)
olive drab green (SKU: VSR4 OD)
ACU (SKU: VSR4 ACU)
MC (SKU: VSR4 MC)
|
|
| |
To
see additional product descriptions, click on the type of product
in which you're interested in the column on the far left-hand side
of this page.
|
